Description
Description for Commander C200 0.55kW 1.8A 380/480Vac 3PH
380-480Vac, 1.8A – 0.55KW Heavy Duty Rating
Size 2, 205 H x 75 W x 150 D
AC/AC (With Internal Choke)
Standard Configuration
The Commander C200 delivers benchmark functionality at no added cost to the base drive itself. Plug-in options, dynamic performance, PLC functionality and other advanced features such as fieldbus, Ethernet, and Modbus RTU communications ensure that in more complex applications Commander C200 can deliver more than the average general purpose drive – giving you lower cost solutions and better productivity in your motor control applications.
Features
Features for Control Techniques Commander C200 0.55kW 1.8A 380/480Vac 3PH
Common Features
• Open Loop Vector or V/HZ induction Motor Control
• Enhanced Open Loop Rotor Flux Control for induction Motors
Benefits
• For a quick motor setup all parameters are printed on the front of the drive so you can be up and running within seconds
• Fixed boost motor control set as default for easy commissioning
• Enhanced control with RFC-A mode to stabilize running speed under variable load
• Onboard safety with dual Safe Torque Off certified to SIL3/PLe
• More control, less cost with on board PLC and built-in independent PID control
• Ease of integration to external PLC or other management systems through powerful networking options
• Reliability achieved with conformal coated PCBs and ingress-resistant patented airflow system
• Rapid diagnostics with Diagnostics Tool app for mobile device
• Fast task based commissioning and easy maintenance with Connect software
Highlights
✓ Set just 4 parameters to get your drive started
✓ Plug-in options for advanced control
✓ Equipped with the latest energy saving features
✓ Up to 180% overload for high torque applications
✓ On board PLC
✓ Straightforward installation and commissioning
✓ Easy motor pairing and performance control
✓ Robust and reliable design
For Full Details Refer to the Manufacturers Manual
| Pumping, Ventilating & Compressing
- Improved energy efficiency during periods of low demand
- On board PLC & PID functionalities make advanced control easy and efficient without the need of an external controller
- Skip Frequencies allow users to easily avoid equipment resonant frequencies, reducing high vibration levels
- Supply Loss Ride Through will keep the drive up and running through most power outages
|
| Conveying
- Accurate remote speed control with fieldbus communications
- S-ramp acceleration / deceleration profiling provides smooth speed transitions minimizing machine jerk
- Overload capacity up to 180% to add stability
- Avoids early wear and tear of the equipment
|
| Lifting, Hoisting & Winching
- Adjustable mechanical brake sequencing with torque proving function – no need for an external controller
- Embedded PLC functionality can manage local I/O reducing the need for an external controller
|
| Access Control
- Smooth motion with enhanced open loop control
- Small physical size allows the drive to be mounted easily in smaller control cabinets
- Highly reliable in harsh environments, providing long lasting service
|
| Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders)
- Ease of integration to external PLC or other management systems through powerful networking options
- Conformal coating for enhanced environmental protection
- Overload capacity up to 180%
- Highly stable motor control
|
Options
Options for Control Techniques Commander C200 0.55kW 1.8A 380/480Vac 3PH
Keypads for Commander C200 0.55kW 1.8A 380/480Vac 3PH | Remote Keypad RTC The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics | | Remote Keypad All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4) |
System Integration Modules – Communications for Commander C200 0.55kW 1.8A 380/480Vac 3PH
| SI-POWERLINK Connects Unidrive, Commander, Digitax and the Pump Drive families to all POWERLINK networks. SI-POWERLINK serves applications ranging from simple open-loop systems through to those demanding precise motion control. The protocol is based upon standard Ethernet and provides a solution for real-time Industrial Ethernet to satisfy the requirements of industrial automation and process control. | | SI-PROFIBUS SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features. |
| SI-DeviceNet SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality. | | SI-CANopen Commander C’s SI-CANopen interface module supports various profiles, offering optimum flexibility. |
| SI-Ethernet SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies. | | SI-EtherCAT SI-EtherCAT allows Commander C general purpose drive to connect and interface with EtherCAT networks. |
| SI-PROFINET SI-PROFINET allows Commander C to communicate and interface with PROFINET PLCs and networks. | | SI-Interbus Interbus interface modules. |
System Integration Modules – Additional I/O for Commander C200 0.55kW 1.8A 380/480Vac 3PH
| SI-I/O Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays |
Drive interface units – Back-up for Commander C200 0.55kW 1.8A 380/480Vac 3PH
| AI-Back-up Adaptor Port adaptor for SD card parameter cloning, and an input for 24 V back-up. | | AI-Smart Adaptor Has a built-in memory for parameter cloning and an input for 24 V back-up. |
Drive interface units – Communications for Commander C200 0.55kW 1.8A 380/480Vac 3PH
| AI-485 Adaptor Adaptor that allows the drive to communicate via RS485. | | AI-485 24 V Adaptor Adaptor with 24 V input. |
| RS485 Cable The USB comms cable allows the drive to connect to a PC for use with Commander’s PC tools. | | |