Control Techniques Digitax HD M750 0.37kW 2.2A 200/240Vac 1PH M750-01200040A10

Original price was: £1,438.00.Current price is: £920.32. (£1,104.38 inc. VAT)

SKU: M750-01200040A10 Categories: , ,

Available on back-order

Control Techniques Digitax HD M750 0.37kW 2.2A 200/240Vac

200-240Vac, 2.2A – 0.37KW AC Induction Rating

Size 1, 233 H x 40 W x 174 D

Standard Configuration

The multi-protocol drive that does it all


Digitax M750 is an extremely versatile multi-protocol network drive. It supports EtherNet/IP, Profinet RT and Modubus TCP/IP as well as peer-to-peer synchronization with RTMoE (Real Time Motion over Ethernet). It also features and onboard Advanced Motion Controller for distributed 1.5 axis motion control.

For Full Details Refer to the Manufacturers Manual

The perfect mix of application-specific features developed into a single solution

Open, efficient, synchronized Ethernet

Maximize machine productivity through high performance deterministic Ethernet. Access future developments in IT-based industries where billions of nodes are installed, future proofing your investments. Ethernet webpages hosted onboard the M750 Ethernet drive

Rationalize inventory

Machine builders often need to maintain multiple PLC environments to serve different geographical markets. With its multi-protocol ethernet interface and on-board motion capability, Digitax M750 allows the same drive and motion design to be used in different ecosystems, rationalizing inventory and spares

Reduce design time

Share the same design on multiple systems to reduce complexity.
PLC Controlled Motion simplifies integration of the M750 multi-protocol drive into the most common PLC environments. It provides easy access to the drive’s onboard Advanced Motion Controller through a simplified drive configuration workflow, automatic configuration of the communication links and PLC function block libraries.

  • Features of the Control Techniques Digitax HD M750 0.37kW 2.2A 200/240Vac


    Maximum performance
    • 300% peak current performance pulse-duty overload
    • Optimized control loops for high dynamic performance
    • Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
    • Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others.
    • Maximum performance package with high torque density, low inertia Unimotor hd servo motors


    Supports RTMoE (Real-Time Motion over Ethernet) which provides synchronized communication between drives using the Precision Time Protocol as defined by IEEE1588 V2:

    • Distributed clocks are used to automatically synchronize the position, speed and current loops across all drives
    • 1 ms cycle time for synchronous cyclic data
    • High speed network synchronization of less than 1 μs jitter (typically (typically <200 ns) and 1 ms cycle time for synchronous cyclic data
    • Multi-protocol Ethernet support of EtherNet/IP or PROFINET RT in addition to Modbus TCP/IP, HTTP and SMTP


    Advanced 1.5 axes Motion Controller, key features include:

    • 250 μs cycle time
    • Motion profile generator
    • Electronic gearbox
    • Interpolated cam
    • Homing functions
    • High speed position freeze
    Minimum size
    • 40 mm drive width and option bracket adds 22 mm, providing a maximum drive width of 62 mm;
    • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard);
    • Fits into cabinets just 200 mm deep.
    Easy installation and setup
    • DIN rail alignment;
    • Kits for easy multi-axis installation;
    • Single motor cable and electronic motor name plate for fast set up;
    • Seamless motor-drive pairing with Unimotor hd servo motors;
    • Easy access pluggable connectors;
    • Rapid commissioning with the Connect PC tool and SD cards;
    • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features;
    • Programmable with IEC61131 standard languages.
    • Two option slots to add features and functionality for Communication, Feedback, I/O and/or Machine Controller (please see `Options & Accessories` section for details)
    • Multi-protocol Ethernet
    Safety on-board
    • Reduced downtime with machine safety- Integrated dual Safe Torque Off (STO)- Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)- Safe motion and CIP Safety with MiS250 option


Weight0.75 kg
Dimensions233 × 40 × 174 cm
Power Heavy Duty Rating









Control Techniques


Digitax HD


Control Techniques