Control Techniques Digitax HD M753 0.37kW 2.2A 200/240Vac
200-240Vac, 2.2A – 0.37KW AC Induction Rating
Size 1, 233 H x 40 W x 174 D
Standard Configuration
| Easy EtherCAT integration
- Integrated 2-port EtherCAT switch for easy daisy-chaining into an in-line topology
- EoE (Ethernet over EtherCAT) support allows PC tool connection for
commissioning and monitoring over the EtherCAT network
- The station alias can be dynamically assigned by the EtherCAT master,
or hardwired with the two rotary switches built into the display
- An optional RS485 adaptor is available, providing a back-up PC tool
connection in case of network failure |
| High performance with flexibility
- Operate with any automation product via EtherCAT
- Operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT
- Dual 100Mbps EtherCAT interfaces for use with in-line topologies
- Non-cyclic data communication using the CANopen over EtherCAT (CoE) mailbox Flexibility for all applications achieved through full access to drive functions
- CANopen over EtherCAT (CoE) with CiA-402 profile including: Cyclic synchronous position mode, Cyclic synchronous velocity
mode, Cyclic synchronous torque mode, Homing mode, Interpolated position mode, Velocity mode, SDO access to all profile, objects and drive parameters |
| Improved productivity with machine safety
- The built-in dual Safe Torque Off is certified to SIL3 / PLe.
- With the MiS250 option(*), the integrated safety can be extended to include
- Safe Motion Safe Stop 1 (SS1)
- Safe Stop 2 (SS2)
- Safely Limited Speed (SLS)
- Safe Operating Stop (SOS)
- Safe Direction (SDI)
- Safe Speed Monitor (SSM)
- Safe Emergency Stop (SES)
- Safely Limited Position (SLP)
- Safely Limited Acceleration (SLA)
- Safe Brake Control (SBC)
- Two Hand Control
- Fail Safe over EtherCAT
- Up to 32 booleans and 4 integers communication interface
- Safe speed and position transfer to safety controller
|
| Rapid and flexible commissioning
- Ethernet over EtherCAT (EoE) for PC tool communication
- File over EtherCAT (FoE) for drive parameter transfer
- Rotary dials can be used for local setting of the station alias
|
Features of the Control Techniques Digitax HD M753 0.37kW 2.2A 200/240Vac
Maximise performance
- 300% peak current performance pulse-duty overload
- Optimized control loops for high dynamic performance
- 62.5 μs current loop
- 250 μs position and speed loop
- Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
- Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
- Maximum performance package with high torque density, low inertia Unimotor hd servo motors
- On-board Advanced Motion Controller for distributed 1.5 axis motion control
- High speed network synchronisation of less than 1 μs jitter
Easy installation and setup
- DIN rail alignment
- Kits for easy multi-axis installation
- Single motor cable and electronic motor name plate for fast set up
- Seamless motor-drive pairing with Unimotor hd servo motors from Control Techniques
- Easy access pluggable connectors
- Rapid and flexible commissioning
- Ethernet over EtherCAT (EoE) for PC tool communication
- File over EtherCAT (FoE) for drive parameter transfer
- Rotary dials can be used for local setting of the station alias