Control Techniques Digitax HD M753 3kW 8A 380/480Vac 3PH M753-02400080A10

£1,138.20 (£1,365.84 inc. VAT)

SKU: M753-02400080A10 Categories: , ,

Available on back-order

Control Techniques Digitax HD M753 3kW 8A 380/480Vac

380-480Vac, 8A – 3KW AC Induction Rating

Size 2, 278 H x 40 W x 174 D

Standard Configuration

For high-performance centralised motion control architectures

 

Digitax M753 features an integrated 2-port EtherCAT switch for easy integration into centralized motion control applications.

EoE (Ethernet over EtherCAT) support allows pc-tool connection for commissioning and monitoring over the EtherCAT network. The servo drive can operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT.

For Full Details Refer to the Manufacturers Manual

Bring high servo performance to your centralized motion architecture

 

Easy EtherCAT integration
  • Integrated 2-port EtherCAT switch for easy daisy-chaining into an in-line topology
  • EoE (Ethernet over EtherCAT) support allows PC tool connection for
    commissioning and monitoring over the EtherCAT network
  • The station alias can be dynamically assigned by the EtherCAT master,
    or hardwired with the two rotary switches built into the display
  • An optional RS485 adaptor is available, providing a back-up PC tool
    connection in case of network failure
High performance with flexibility
  • Operate with any automation product via EtherCAT
  • Operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT
  • Dual 100Mbps EtherCAT interfaces for use with in-line topologies
  • Non-cyclic data communication using the CANopen over EtherCAT (CoE) mailbox Flexibility for all applications achieved through full access to drive functions
  • CANopen over EtherCAT (CoE) with CiA-402 profile including: Cyclic synchronous position mode, Cyclic synchronous velocity
    mode, Cyclic synchronous torque mode, Homing mode, Interpolated position mode, Velocity mode, SDO access to all profile, objects and drive parameters
Improved productivity with machine safety
  • The built-in dual Safe Torque Off is certified to SIL3 / PLe.
  • With the MiS250 option(*), the integrated safety can be extended to include
  • Safe Motion Safe Stop 1 (SS1)
  • Safe Stop 2 (SS2)
  • Safely Limited Speed (SLS)
  • Safe Operating Stop (SOS)
  • Safe Direction (SDI)
  • Safe Speed Monitor (SSM)
  • Safe Emergency Stop (SES)
  • Safely Limited Position (SLP)
  • Safely Limited Acceleration (SLA)
  • Safe Brake Control (SBC)
  • Two Hand Control
  • Fail Safe over EtherCAT
  • Up to 32 booleans and 4 integers communication interface
  • Safe speed and position transfer to safety controller
 
Rapid and flexible commissioning
  • Ethernet over EtherCAT (EoE) for PC tool communication
  • File over EtherCAT (FoE) for drive parameter transfer
  • Rotary dials can be used for local setting of the station alias
  • Features of the Control Techniques Digitax HD M753 3kW 8A 380/480Vac

     

    Maximise performance
    • 300% peak current performance pulse-duty overload
    • Optimized control loops for high dynamic performance
      • 62.5 μs current loop
      • 250 μs position and speed loop
    • Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
    • Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
    • Maximum performance package with high torque density, low inertia Unimotor hd servo motors
    • On-board Advanced Motion Controller for distributed 1.5 axis motion control
    • High speed network synchronisation of less than 1 μs jitter
    Minimum size
    • 40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
    • MCi210 Machine Control module for complete standalone capability, removing the need for an external controller
    • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
    • Fits into cabinets just 200 mm deep
    Easy installation and setup
    • DIN rail alignment
    • Kits for easy multi-axis installation
    • Single motor cable and electronic motor name plate for fast set up
    • Seamless motor-drive pairing with Unimotor hd servo motors from Control Techniques
    • Easy access pluggable connectors
    • Rapid and flexible commissioning
      • Ethernet over EtherCAT (EoE) for PC tool communication
      • File over EtherCAT (FoE) for drive parameter transfer
      • Rotary dials can be used for local setting of the station alias
    Flexibility
    • Operate with any automation product via EtherCAT- Operate with motion controllers, motion PLCs and Industrial PCs via built-in EtherCAT- Dual 100Mbps EtherCAT interfaces for use with in-line topologies- Non-cyclic data communication using the CoE mailbox
    • Flexibility for all applications achieved through full access to drive functions- CANopen over EtherCAT (CoE) with CiA-402 profile including:
      • Cyclic synchronous position mode
      • Cyclic synchronous velocity mode
      • Cyclic synchronous torque mode
      • Homing mode
      • Interpolated position mode
      • Velocity mode
      • SDO access to all profile objects and drive parameters
    • An optional RS485 adaptor is available, providing a back-up PC tool connection in case of network failure
    Improved productivity with machine safety

     

    The built-in dual Safe Torque Off is certified to SIL3 / PLe.

     

    With the MiS250 option, the integrated safety can be extended to include
    • Safe Motion- Safe Stop 1 (SS1)- Safe Stop 2 (SS2)- Safely Limited Speed (SLS)- Safe Operating Stop (SOS)- Safe Direction (SDI)- Safe Speed Monitor (SSM)- Safe Emergency Stop (SES)- Safely Limited Position (SLP)- Safely Limited Acceleration (SLA)- Safe Brake Control (SBC)- Two Hand Control
    • Fail Safe over EtherCAT- Up to 32 booleans and 4 integers communication interface- Safe speed and position transfer to safety controller

     

Weight1.3 kg
Dimensions278 × 40 × 174 cm
Power Heavy Duty Rating

3kW

Control

Open-Loop

Voltage

380-480V

Phases

3ph

Manufacturer

Control Techniques

Range

Digitax HD

Brand

Control Techniques

Model

M753