Control Techniques Digitax HD M754 1.1kW 6.5A 200/240Vac 3PH M754-01200065A10

Original price was: £1,845.00.Current price is: £1,291.50. (£1,549.80 inc. VAT)

SKU: M754-01200065A10 Categories: , ,

Available on back-order

Control Techniques Digitax HD M754 1.1kW 6.5A 200/240Vac

200-240Vac, 6.5A – 1.1KW AC Induction Rating

Size 1, 233 H x 40 W x 174 D

Standard Configuration

 

Servo drive and controller in one

A powerful MCi second processor onboard the Digitax M754 servo drive brings a whole host of machine design opportunities.

Integrated machine controller

Run on-board application programs up to four times faster than a standard PLC.
Control multiple drives across the network for perfectly synchronized multi-axis machine performance.

Machine Control Studio

Machine Control Studio (MCS) is a flexible and intuitive environment for programming automation and motion control. Fully IEC 61131-3 compliant, it supports Function Block Diagram (FBD), Structured Function Chart (SFC), LadderDiagram (LD), Instruction List (IL), Continuous Function Chart (CFC) and Structured Text (ST) with intuitive IntelliSense functionality.

Modbus TCP/IP master

Simple integration with external components such as Remote I/O, HMIs and PLCs can be achieved with Modbus TCP/IP on the integrated 2-port standard Ethernet switch.

 

Features of the Control Techniques Digitax HD M754 1.1kW 6.5A 200/240Vac

 

Maximum performance
  • 300% peak current performance pulse-duty overload
  • Optimized control loops for high dynamic performance
  • 62.5 μs current loop
  • 250 μs position and speed loop
  • Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
  • Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others
  • Maximum performance package with high torque density, low inertia Unimotor hd servo motors

RTMoE (Real-Time Motion over Ethernet) for high-speed synchronized communication between drives

  • Distributed clocks to synchronize position, speed and current loops across drives
  • Precision Time Protocol as defined by IEEE1588 V2
  • High speed network synchronization of less than 1 μs jitter (typically <200 ns)

Powerful MCi second processor for decentralised motion applications

  • Runs application programs up to four time faster than a standard PLC
  • Integrates with the onboard AMC (Advanced Motion Controller) to carry out motion functions at the drive’s 250 μs cycle time
  • Can coordinate multiple drives over the Ethernet network, providing perfectly synchronised multi-axis machine performance
  • Programs are fast and easy to develop thanks to the user-friendly Machine Control Studio software which uses industry standard IEC61131-3 programming language
Easy installation and setup
  • DIN rail alignment
  • Kits for easy multi-axis installation
  • Single motor cable and electronic motor name plate for fast set up
  • Seamless motor-drive pairing with Unimotor hd servo motors
  • Easy access pluggable connectors
  • Rapid commissioning with the Connect PC tool and SD cards
  • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
  • Programmable with IEC61131 standard languages
Safety on-board
  • Reduced downtime with machine safety- Integrated dual safe torque off- Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
Weight0.75 kg
Dimensions233 × 40 × 174 cm
Power Heavy Duty Rating

1.1kW

Control

Open-Loop

Voltage

200-240V

Phases

3ph

Manufacturer

Control Techniques

Range

Digitax HD

Brand

Control Techniques

Model

M754