Control Techniques Digitax HD M754 5.5kW 13.5A 380/480Vac 3PH M754-03400135A10

£1,598.10 (£1,917.72 inc. VAT)

SKU: M754-03400135A10 Categories: , ,

Available on back-order

Control Techniques Digitax HD M754 5.5kW 13.5A 380/480Vac

380-480Vac, 13.5A – 5.5KW AC Induction Rating

Size 3, 328 H x 40 W x 174 D

Standard Configuration

Servo drive and controller in one

powerful MCi second processor onboard the Digitax M754 servo drive brings a whole host of machine design opportunities.

The onboard MCi processor executes comprehensive programs that can control multiple drives and motors simultaneously across real-time networks.

Onboard Ethernet using RTMoE (Real Time Motion over Ethernet) provides synchronization and communication between drives using the Precision Time Protocol (PTP) as defined by IEEE1588 V2.

Simple integration with external components such as Remote I/O, HMIs and PLCs can be achieved with Modbus TCP/IP on the integrated 2-port standard Ethernet switch.

For Full Details Refer to the Manufacturers Manual

 

The ultimate MACHINE CONTROLLER

Integrated machine controller

Run on-board application programs up to four times faster than a standard PLC.
Control multiple drives across the network for perfectly synchronized multi-axis machine performance.

Machine Control Studio

Machine Control Studio (MCS) is a flexible and intuitive environment for programming automation and motion control. Fully IEC 61131-3 compliant, it supports Function Block Diagram (FBD), Structured Function Chart (SFC), LadderDiagram (LD), Instruction List (IL), Continuous Function Chart (CFC) and Structured Text (ST) with intuitive IntelliSense functionality.

Modbus TCP/IP master

Simple integration with external components such as Remote I/O, HMIs and PLCs can be achieved with Modbus TCP/IP on the integrated 2-port standard Ethernet switch.

 

  • Features of the Control Techniques Digitax HD M754 5.5kW 13.5A 380/480Vac

     

    Maximum performance
    • 300% peak current performance pulse-duty overload
    • Optimized control loops for high dynamic performance
      • 62.5 μs current loop
      • 250 μs position and speed loop
    • Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
    • Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others
    • Maximum performance package with high torque density, low inertia Unimotor hd servo motors

     

    RTMoE (Real-Time Motion over Ethernet) for high-speed synchronized communication between drives

    • Distributed clocks to synchronize position, speed and current loops across drives
    • Precision Time Protocol as defined by IEEE1588 V2
    • High speed network synchronization of less than 1 μs jitter (typically <200 ns)

     

    Powerful MCi second processor for decentralised motion applications

    • Runs application programs up to four time faster than a standard PLC
    • Integrates with the onboard AMC (Advanced Motion Controller) to carry out motion functions at the drive’s 250 μs cycle time
    • Can coordinate multiple drives over the Ethernet network, providing perfectly synchronised multi-axis machine performance
    • Programs are fast and easy to develop thanks to the user-friendly Machine Control Studio software which uses industry standard IEC61131-3 programming languages

     

    Minimum size
    • 40 mm drive width – 25 drives (up to 16A each) can fit in just 1 meter of cabinet space
    • Bring space reduction to the same level with complete standalone capability, removing the need for an external controller
    • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
    • Fits into cabinets just 200 mm deep

     

    Easy installation and setup
    • DIN rail alignment
    • Kits for easy multi-axis installation
    • Single motor cable and electronic motor name plate for fast set up
    • Seamless motor-drive pairing with Unimotor hd servo motors
    • Easy access pluggable connectors
    • Rapid commissioning with the Connect PC tool and SD cards
    • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
      • Programmable with IEC61131 standard languages

     

    Flexibility
    • Two Ethernet ports with an internal switch
    • Built-in RS485 communications
    • Extends connectivity with 3 x digital inputs, 1 x digital output and 1 x digital I/O
    • Modbus TCP/IP master (up to 5 nodes)
    • Full onboard programmability

     

    Safety on-board
    • Reduced downtime with machine safety- Integrated dual safe torque off- Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
Weight1.5 kg
Dimensions328 × 40 × 174 cm
Power Heavy Duty Rating

5.5kW

Control

Open-Loop

Voltage

380-480V

Phases

3ph

Manufacturer

Control Techniques

Range

Digitax HD

Brand

Control Techniques

Model

M754