Control Techniques Pump Drive F600 7.5kW 30A 200/240Vac 3PH F600-05200300A10100AB103

£1,129.10 (£1,354.92 inc. VAT)

SKU: F600-05200300A10100AB103 Categories: , ,

Available on back-order

Description

 

Description for Control Techniques Pump Drive F600 7.5kW 30A 200/240Vac 3PH

 

200-240Vac, 30A – 7.5kW Normal Duty Rating

Size 5 (391 H x 143 W x 200 D mm)

Speaks your language

The F600 drive is tuned to suit your every need, optimised for minimal setup time yet sacrificing none of the flexibility. Whatever the challenge, our dedicated approach to clear parameter naming and structuring ensures we not only have the answers, but in a format you’ll understand.

Energy savings, unlocking the potential

On average, 85% of a pump’s life-cycle cost is attributed to its energy consumption, therefore, optimising the energy usage can mean a significant reduction in the total cost of ownership. The F600 drive thrives on delivering more efficient ways of operating your variable torque application. You’ll see the benefits in reduced running costs and lower energy requirements.

Total control

The F600 can also control the most efficient motors available, meeting IE5 efficiency levels, such as the Nidec Leroy Somer Dyneo+ hybrid permanent-magnet motor. With all of this combined, the F600 is your best choice to save you money every day.

Engineered for your application

The F600 Pump Drive offers a host of dedicated features including dry-run prevention, pipe fill, pump cleaning, over-cycling protection and level switch control. A range of different control modes covering single pumps and also different parallel pump configurations make Control Techniques’ F600 a truly versatile solution.

Free 5 year warranty

To share our confidence in the reliability of Control Techniques, drives in the F600 range are eligible for Control Techniques’ extended warranty, at no extra cost.
It is a testament to our exceptional track record for reliability, giving you total peace of mind that your investment is protected and your site will continue to run uninterrupted.
Warranty terms and conditions apply.

Weight 7.4 kg
Dimensions 39.1 × 14.3 × 20.0 cm
Manufacturer

Nidec

Brand

Control Techniques

Model

Pump Drive

Range

F600

Power Normal Duty Rating

7.5kW

Current Normal Duty Rating

30A

Current Output Type

AC

Frame Size

Size 5

Voltage

200-240V

Phases

3ph

Control

Open-Loop, RFC-A (Sensorless Induction Motor), RFC-S (Sensorless and feedback, via option module)

Filter

C3 built-in EMC filter

Features

 

Features for Control Techniques Pump Drive F600 7.5kW 30A 200/240Vac 3PH

 

Unmatched total cost of ownership

With innovative protective features and extended equipment life

The F600 has comprehensive pump and motor protection features which minimise unplanned downtime, improving overall effectiveness and guaranteeing better value for money. Bring true resilience to your application and easily ride-through component failures.

Automatic Error Recovery

In the unlikely event of detecting an error with your pump, the F600 has the ability to dynamically recover and resume normal operation.

Limit Protection

If the feedback exceeds the limits defined for your application, the F600 has the ability to raise an alarm or stop the drive to protect your equipment and preserve its lifetime.

Transducer Loss Protection

In the event of losing connection to the transducer, the F600 can stop, continue to run at a fixed speed or ignore the fault depending on the application requirements.

Fire mode

Fire mode allows the drive to disable all trips and to continue to run uninterrupted during emergency events if the application requires.

Save on energy through a wide range of energy features

The F600 is 98% efficient, meaning very little energy is lost in power conversion.

Even more, the real savings potential gets unlocked by the F600’s built-in features that can further reduce energy consumption:

Low load savings

The F600 helps maximise energy savings when demand is low. Activing Control Techniques’ leading-edge Low Load Power Saving function, the drive dynamically reduces the voltage applied to reduce losses in the motor and make the system more efficient.

Sleep mode

When demand falls below a specified set-point the drive will automatically enter sleep mode and restart itself once demand rises above the set-point. Not only does this greatly reduce the amount of energy consumed, it also saves on equipment wear to preserve its lifetime.

The F600 features optimised control for your flow applications

 

Pipe fill

Prevent spikes in pressure at start-up using a controlled ramp, to protect your piping system and the pump itself.

Dry-run prevention

Prevent the pump running dry by checking the load against a threshold; with flexible configurations to dynamically adjust output, set an alarm or stop the drive.

Over-cycling protection

Optimise drive, motor and pump sizing, and regulate pump wear by limiting the number of start-stops per hour. Flexible configurations allow to dynamically alter cycling reference limits, set an alarm or stop the drive when a limit is reached.

No-flow detection

Where there is no-flow or low-flow, the F600 drive can automatically enter sleep mode to save energy, based on the feedback of a pulsed flow transducer, or triggered by a flow switch, or detected by the software alone.

Cleaning

Live, continuous monitoring of the system is used to trigger an automatic drive-based cleansing cycle to clear the pump impeller and help avoid maintenance costs on cleaning pump blockages.

Level switch control

Level switches provide critical protection for tanks in the event of the level reaching a “high” switch, whereby the pump is stopped, or a “low” switch, whereby the pump is started, to ensure pumping within tank levels.

Pump Control Modes | Flexible support for every system

 

Single pump

Control Techniques’ Single Pump mode is an effective and versatile variable speed control solution for maintaining a constant set-point in a single pump configuration.

  • Fire mode allows the drive to disable all trips and to continue to run uninterrupted during emergency events if the application requires

Cascade

Cascade mode allows the F600 to operate with up to 4 assist pumps to aid the primary pump when required.

  • Energy usage is optimised whereby the assist pumps are only enabled when demand reaches sufficient levels.
  • Assist pumps are used alternately to apply uniform wear and increase pump availability.
  • Over-cycling protection for assist pumps to control the number of starts and stops per hour.

f600-cascade

Multi-leader

Complete control of your application with up to 3 x F600 drives and maximum energy savings with these variable frequency drives running parallel.

  • The Multi-leader drive configuration provides redundancy and removes the need for a PLC
  • The “lead” drive is automatically cycled to apply uniform wear
  • If the “lead” drive loses its transducer, it can access the transducer feedback from another F600 in the system over Ethernet
  • Dynamic re-selection of “lead” pump if a pump is taken out of service or develops a fault

Options

 

Options for Control Techniques Pump Drive F600 7.5kW 30A 200/240Vac 3PH

 

Keypads for Pump Drive 7.5kW 30A 200/240Vac 3PH

KI-HOA Keypad RTC (Supplied as standard*)

The KI-HOA Keypad RTC provides Hand-Off-Auto control. The display presents up to four lines of real text with multilanguage translation, enhancing clarity and increasing ease of use. A battery operated real-time clock allows scheduling of run and off periods and adds accurate time stamping to diagnostics to aid rapid fault resolution.

Remote HOA Keypad RTC

Remote mountable keypad, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). The keypad offers Hand-Off-Auto control and can present up to four lines of real text with multi language translation, enhancing clarity and increasing ease of use. Battery operated real-time clock allows scheduling of run and off periods and adds accurate time stamping to logged events, aiding diagnostics.

System Integration Modules – Communications for Pump Drive F600 7.5kW 30A 200/240Vac 3PH

SI-POWERLINK

Connects Unidrive, Commander, Digitax and the Pump Drive families to all POWERLINK networks. SI-POWERLINK serves applications ranging from simple open-loop systems through to those demanding precise motion control. The protocol is based upon standard Ethernet and provides a solution for real-time Industrial Ethernet to satisfy the requirements of industrial automation and process control.

SI-PROFIBUS

PROFIBUS interface module PROFIBUS-DP (Decentralized Peripheral) interface module enables follower connectivity. It is possible to use more than one SI-PROFIBUS or a combination of SI-PROFIBUS and other option modules to add additional functionality such as extended I/O, gateway functionality, or additional PLC features.

SI-DeviceNet

DeviceNet networking system interface module enables follower connectivity. It is possible to use more than one SIDeviceNet or a combination of SI-DeviceNet and other option modules to provide additional functionality such as extended I/O, gateway functionality, or additional PLC features.

SI-CANopen

CANopen interface module supporting various profiles, including several drive profiles.

SI-Ethernet

External Ethernet module that supports EtherNet/IP and Modbus TCP/IP and has an integrated web server that can generate emails. The module can be used to provide high speed drive access, global connectivity and integration with IT network technologies, such as wireless networking. To use multiple F600 drives in Multi-leader mode in a parallel pump system, each F600 drive must have an SI-Ethernet module fitted.

SI-EtherCAT

SI-EtherCAT allows the drive to connect and interface with EtherCAT networks.

SI-PROFINET

SI-PROFINET allows the drive to communicate and interface with PROFINET PLCs and networks.

System Integration Modules – Applications for Pump Drive F600 7.5kW 30A 200/240Vac 3PH

MCi200

Second processor, providing advanced machine control using Machine Control Studio

MCi210

Adds to the MCi200 with a dual port Ethernet interface directly on the processor and additional I/O

System Integration Modules – Additional I/O for Pump Drive F600 7.5kW 30A 200/240Vac 3PH

SI-I/O

Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays

Drive interface units – Back-up for Pump Drive F600 7.5kW 30A 200/240Vac 3PH

Smartcard

The optional Smartcard memory device can be used to back-up parameter sets, as well as copying them from one drive to another

SD Card Adaptor

Conversion device that allows an SD card to be inserted into the Smartcard slot, for parameter cloning and application programs

Drive interface units – Communications for Pump Drive F600 7.5kW 30A 200/240Vac 3PH

KI-485 Adaptor
This adaptor can be fit in place of the drive keypad and provides additional ports to communicate via RS485. The adaptor is commonly used for programming the drive.

* Also requires an adaptor.

Downloads

 

Downloads for Control Techniques Pump Drive F600 7.5kW 30A 200/240Vac 3PH

Pump Drive F600 Brochure

Pump Drive F600 Datasheet

Pump Drive F600 User-Guide