Control Techniques SI-Profinet RT V2 Module
SI-PROFINET allows Control Techniques general purpose and servo drives to communicate and interface with PROFINET PLCs and networks.
Features include:
- Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correction
- Integrated switches allow for use of line networks i.e. daisy chaining
- Both ports operate in full duplex mode as a network switch PROFINET Real-time class RT_Class_1 and conformance class A
- Cycle times from 2 ms to 512 ms specified during configuration
- Automatic device replacement using the LLDP and DCP protocols
- LED indication of network port activity
- Up to 64 cyclic I/O module slots (maximum of 32 in and 32 out) configured by network configuration tool and GSDML file Identification and maintenance functions I&M0 to I&M4 supported
Drive CompatibilityThe compatibility table below highlights which Control Techniques drives support this option module |
||||||
Unidrive M200 |
Unidrive M300 |
Unidrive M400 |
Unidrive M600 |
Unidrive M700 |
Digitax HD |
Commander C |
√ | √ | √ | √ | √ | √ | √ |